|Material||Mild Steel or Stainless Steel|
KLAROL Oil Purifier can remove contamination down to less than one micron, water, air gases and lower oxidised molecules of oil from turbine oils.
Removal of free and emulsified water prevents formation of varnish and bacteria. Turbine oil is 98 base oil and it has approximately 2% additives. By keeping the oil free from water and contamination down to less than a micron, KLAROL protects the turbine oil additives, which can then continue to perform their essential functions for a very long time thereby increasing oil life tremendously.
KLAROL replaceable filter element uses filter media which not only removes particles by depth filtration but it also has an affinity to remove varnish, sludge and lacquer from oil by adsorbtion.
The KLAROL filter is unaffected by water and can remove large quantities of contamination which makes it a very cost effective tool for removing contamination from turbine oils.
KLAROL can be installed directly on any turbine oil reservoir as a by-pass oil cleaning unit or it can be used as a mobile machine.
KLAROL mobile machines are fitted with pump / motor, pre-heater, vacuum pump etc to clean oil in the parent machine oil tank or outside it in drums or other reservoirs.